bedpan washing tool
VIEW PRODUCTS   •   HOW TO INSTALL   •   CONTACT US

How to Install

We created all of our Handy Spray bedpan washers to be easy and quick to install! Simply follow the steps below, choosing the directions for our ELITE series of sprayers, or the WHITE MULTI-PURPOSE line.

Should you have any questions regarding installation or any of our products, please feel free to contact us.

 

INSTALLATION STEPS - ELITE SERIES

STEP 1

Turn off water to flush tank.  Flush to empty tank. Unscrew the supply line from under the flush tank.

STEP 2

Screw on the 3-Way Valve under the tank where the supply was previously attached. Make sure the 3-way valve is screwed on straight and has the dome rubber washer inserted.

handy spray bedpan cleaner clean your bedpans
   

STEP 3

Screw on the supply line to the bottom on the 3-Way valve.

STEP 4

Screw on hose from the kit to 3 way valve and the spray head to other end of hose. Turn on water and make sure there are no leaks.

clean bed pans at home easy bedpan washer
   

STEP 5

The hook for holding the spray head when not in use can be hung on side of flush tank.


Note: For added seal, wrap silicon tape on all threads before screwing on.

sprayer for cleaning bedpads and ostomy bags

 

INSTALLATION STEPS - WHITE MULTI-PURPOSE SERIES

Parts included for the White Multi-Purpose Sprayer:
Complete Handy Spray kit
Sealing Tape
Mounting Bracket

Optional Parts Needed:
Flexible tank water line (if current water line is stiff metal)

Tools Required:
Adjustable wrench

STEP 1

Assemble your Handy Spray kit by inserting the attached black rubber washer inside the hose connector and screwing the spray wand on top.

Turn off the water supply by turning the flush tank shut-off valve. Flush the tank to make sure tank is empty and the water has stopped filling

STEP 2

Unscrew the connector hose from the shut-off valve. Screw on Handy Spray connector on top of shut-off valve. (Use sealing tape).

If existing flush tank hose is stiff brass then also unscrew the existing white flush tank nut and remove the hose. Screw new flexible hose to underneath flush tank.

handy spray bedpan cleaner clean your bedpans
   

STEP 3

Screw on the compression nut at other end of flexible hose on top of Handy Spray connector and tighten using sealing tape. Turn on water and check for drips. Tighten as necessary.

Holder can be screwed on to wall (as shown below) or hung on the side of flush tank.

 

clean bed pans at home  

 


handy spway bed pan washer